To function in the world of “M” (manual mode) you need to understand the exposure triangle. The three sides of this triangle are: Shutter Speed, Aperture (or f-stop) and ISO (“film” speed).
Using each side of the triangle either individually or, best of all, in concert with each other can produce stunning images. But first, you need to understand just what each side of the triangle can do for you.
Shutter Speed
Your camera’s shutter determines how much light reaches the “film” or sensor based on time. The shutter is much like a water faucet (and light is often compared to waves, so it’s not a bad analogy!). The longer the faucet is open the more water flows through it. The difference is that a whole lot of light can flow through a camera’s shutter in one second, while not much water gets through a faucet in one second. That’s why most of your camera’s photographs are being done at shutter speeds in fractions of seconds. Oh NO! Not Fractions! I’ll bet you never though you would really use those outside of high school. Here are typical shutter speeds you’ll find in your camera’s menu:
1/1000 One/one thousand of a second – FAST!
1/500 One/five hundred of a second – Half as fast
1/250 As we go down the list
1/125 each shutter speed allows
1/60 double the amount of light as the one
1/30 above it because it’s open twice as long.
And so on… 1/15 – 1/8 – 1/4 – 1/2 – 1 second
Your camera’s shutter can reveal much that the human eye alone cannot. If you set your camera at say, 1/8000 of a second it can stop the fastest things man has made. By using long exposures, holding the shutter open for 30 seconds or more, your camera can gather enough faint light to reveal tens of thousands more star than you’ve ever seen before. However, to see these wonders at this shutter speed or any shutter speed longer than 1/15 of a second, you’ll need to mount your camera on a tripod for a sharp, clear image.
In the next article we will talk about the second part of the triangle, the aperture or f-stop, and all it’s creative uses.